Technical Specifications 技术数据 预应力 **** Fluotop®T* 标准 Yarn 纤维 高强度低纱聚脂丝DIN EN**** Total mass 总重量 ****g/sqm Width 宽度 *m (-* mm/+*mm) Tensile strength (warp/weft) 抗拉强度 (经向/纬向) ****/**** N/*cm ***/***Lbs Tear strength (warp/weft) 抗撕裂强度 (经向/纬向) ***/*** N/*cm Adhesion 吸附力 **daN/*cm Flame retardancy 防火反应 DIN **** B* Surface Treatment 表面处理 PVDF Product destination 产品用途 永久性膜结构 上述技术数据为平均值,允许公差为+/ - *%。 Additional information 补充参考数据 Coating thickness at the top of the yarns 纤维顶部涂层厚度 *** microns Total thickness 总厚度 *.**mm Light transmission “Diffuse/diffuse” method, close to human eye perception 透光率 “传播/传播”方法 与人眼视觉接近 **% NFP **-*** White index 白亮度 **% CIE: Commission Internationale de l’Eclairage 国际照明委员会 Thermal values Transmission Reflexion Absorption Shading coefficient 热能数据: 阳光透射率 阳光反射率 阳光吸收率 日射系数 Ts *% Rs **% As **% Fs **% ASHRAE standard **-**** Transmission UV 紫外线透射 T-UV *% Eppley Solar & Sky U-V radiometer Global thermal conductivity Vertical position Horizontal position 总体热传导 垂直位置 水平位置 U=*.*W/sqm/?C U=*.*W/sqm/?C U=**.* Btu/(hr.sqft.℉) U=**.* Btu/(hr.sqft.℉) The U data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation. U值是模拟使用时的平均条件计算得到的,这些数值应视为是大约数值。 Acoustical weakening index 降音/音障指数 **dBA ISO*** Maximum temporary temperatures sustained by the installed membrane 安装后膜材极端临时温度 -**?C/+**?C Quality management according to 质量保证体系 ISO **** ***%recyclable membranes***%可再生循环膜材 供应商报价单