二维码
导航图标
招标网 > 招标采购 > 招标公告 > 0633-184012118D89新能源试验室转毂底盘测功机采购
分享到:
0633-184012118D89新能源试验室转毂底盘测功机采购
发布日期:2018年09月13日 | 标签:
以下内容,仅对会员开放。如需查看详细内容,请先 注册 成为会员,
已注册会员请 登录 后查看。
招标编号 【正式会员登录后可浏览】 采购业主 【正式会员登录后可浏览】
招标公司 【正式会员登录后可浏览】
联系人 【正式会员登录后可浏览】 联系电话 【正式会员登录后可浏览】 通讯地址 【正式会员登录后可浏览】
邮政编码 【正式会员登录后可浏览】 截止日期 【正式会员登录后可浏览】

公告摘要

    ***********招标公司受业主*******委托,于2018年09月13日在招标网发布0633-184012118D89新能源试验室转毂底盘测功机采购。
    各有关单位请于2018.10.09前与公告中联系人联系,及时参与投标等相关工作,以免错失商业机会。

    部分信息内容如下:(查看详细信息请登录
正文:
************受招标人委托对下列产品及服务进行国际公开竞争性招标,于****年*月**日在中国国际招标网公告。本次招标采用传统招标方式,现邀请合格投标人参加投标。
*.招标条件
项目概况:本招标项目为新能源试验室转毂底盘测功机采购项目,招标人为上汽通用五菱汽车股份有限公司,建设资金为招标人自筹。项目资金已经落实,已具备招标条件,现对该项目下列货物和有关服务进行国际公开招标。
资金到位或资金来源落实情况:项目资金已经落实
项目已具备招标条件的说明:已具备招标条件
*.招标内容
招标项目编号:****-*********D**(重)
招标项目名称:新能源试验室转毂底盘测功机采购项目
项目实施地点:中国***
招标产品列表(主要设备):四驱转毂底盘测功机 *套,详见招标文件。
*.投标人资格要求
投标人应具备的资格或业绩:投标人必须是制造商或制造商唯一授权的代理商,在招标机构登记并购买了招标文件,并已在中国国际招标网()成功注册。投标方应是国际上在该领域有良好信誉的、在中国有技术支持的公司,必须有专人负责设备的维修。投标方必须为系统的主要供应商,即供货范围内的主要部件为自己公司提供,也可以是长期与设备生产厂家**的代理商。如投标方使用其它公司产品或与不同公司的产品组合在一起参与投标,投标方必须提供对其它公司产品的质量、性能、相互通讯和服务的保证负责的承诺。产品制造商必须通过ISO****认证或等效的质量体系认证。投标方曾向国内提供至少**套电力底盘测功机,其中二电机及以上的四驱转毂底盘测功机至少**套,并且都处于正常运转状态,投标方需提供详细用户清单。投标方在中国大陆地区应有专门的售后服务机构,具备较强维修能力,能够提供**小时服务响应,**小时内到达现场服务。投标方应提供售后服务机构的地址、电话、人员清单、联系人等资料。
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
*.招标文件的获取
招标文件领购开始时间:****年*月**日
招标文件领购结束时间:****年*月**日
获取招标文件方式:现场领购
招标文件领购地点:本项目只发售电子版招标文件,请潜在投标人于本招标公告有效期限内,即****年*月**日*时**分**秒起至****年*月**日**时**分**秒止,登录精彩纵横电子交易平台(www.jczh***.com)在线支付后下载招标文件。
招标文件售价:¥*** / $***
*.投标文件的递交
投标截止时间(开标时间):****年**月*日**:**(**时间)
投标文件送达地点:**************分公司(*****东环大道***号居上V*城A座**楼)
开标地点:**************分公司(*****东环大道***号居上V*城A座**楼)
*.投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。
*.联系方式
招标人:上汽通用五菱汽车股份有限公司
地址:*******路**号
联系人:杨明明
电 话:****-*******
招标代理机构:************
地址:*******路**号金源CBD现代城*层(******)
联系人:廖俐娜、黄涛平
联系方式 :****-*******、*******
电子邮件:***********
*.汇款方式
*.其他补充说明
中国国际招标网()为国家商务部指定的全国机电产品国际招标投标活动公共服务平台和行政监督平台,注册事宜请联系中国国际招标网,相关要求详见《机电产品国际招标投标实施办法》。
Bidding Notice
Guangxi Machinery and Electric Equipment Tendering Co., Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on on ****-**-**
*. Bidding Conditions
Overview: SAIC-GM-Wuling Automobile Corporation Ltd. invites sealed bids from eligible suppliers of All-wheel-drive chassis dynamometer by the way of international competitive bidding, and the project’s fund has been confirmed.
Source of Funds: The project’s fund has been confirmed.
Description of The Prepared Bidding Conditions: The project’s fund has been confirmed.
*. Bidding Content
Bidding No: ****-*********D**
Project Name: All-wheel-drive chassis dynamometer purchasing for new energy lab
Place of Implementation: Liuzhou, P.R.China
List of Products: All-wheel-drive chassis dynamometer * sets.
*. Qualification Requirements for Bidder
Qualifications or Performance:
Bidder must be the manufacturer or manufacturer directly authorized agents to participate in the bidding, has been successfully registered in the China International Tendering Network (), and in the tender registration and purchase of tender documents. The bidder shall be an international company with good reputation in this field and technical support in China, and shall have a special person to be responsible for the maintenance of the equipment. The bidder must be the main supplier of the system, that is, the main parts within the supply range for their own company, or can be long-term cooperation with equipment manufacturers agents. If the bidder USES other company's products or combines the products of different companies to participate in the bidding, the bidder must provide the commitment of responsibility for the quality, performance, mutual communication and service guarantee of other company's products.
Product manufacturers must pass the ISO**** or equivalent quality system certification. The bidder has provided at least ** sets of electric chassis dynamometer to China, among which there are at least ** sets of four-wheel drive hub chassis dynamometer with two motors and above, and all of them are in normal operation. The bidder should provide detailed user list. The bidder should have a specialized after-sales service agency in mainland China with strong maintenance capability, capable of providing **-hour service response and arriving at the site within ** hours. The bidder shall provide the address, telephone number, personnel list, contact person and other information of the after-sales service agency.
Joint Bids: NOT Available
Bid without the bidding documents: NOT Available
*. Acquisition of Bidding Documents
Beginning of Selling Bidding Documents: ****-**-**
Ending of Selling Bidding Documents: ****-**-**
To Obtain: On-site Purchase
Place: project only offer electronic tender documents, please invite potential bidders in this bidding announcement valid period, that is, ****-**-** **:**:** until ****-**-** **:**:** stop, login (www.jczh***.com) downloading bidding documents after online payment.
Price of Bidding Documents: ¥***/$***
*. Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time): ****-**-* **:**
Place of Bid: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd. (Address: **F, Block A, Jushang V* Building, No. ***, Donghuan Avenue, Liuzhou, Guangxi)
Place of Bid Opening: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd. (Address: **F, Block A, Jushang V* Building, No. ***, Donghuan Avenue, Liuzhou, Guangxi)
*. The evaluation results will be released on .
*. Contact Details
Purchasers: Saic GM Wuling Automobile Co., Ltd
Add.: No.**, Hexi Road, Liuzhou, Guangxi
Contact: Mr. Yang Mingming
Tel.: (****) ***-*******
Bidding Agency: Guangxi Machinery and Electric Equipment Tendering Co., Ltd
Add.: */F, Jinyuan CBD Building, No.**, Jinhu Road, Nanning, Guangxi
Contact: Ms.Liao Lina, Mr. Huang Taoping
Tel.: (**) ***-*******\*******
Email:***********
*. Remittance Approach
*. Additional Instructions
China international tendering () for International Tendering and bidding of mechanical and electrical products nationwide designated by the State Department of Commerce and public service platform administrative supervision platform, registration please contact Chinese International Tendering requirements, refer to "mechanical and electrical products in the international bidding implementation measures" implementation.
*

为保证您能够顺利投标,请在投标或购买招标文件前向招标代理机构或招标人咨询投标详细要求,有关招标的具体要求及情况以招标代理机构或招标人的解释为准。

地区站
东北:辽宁 吉林 黑龙江
华南:广东 广西 海南
西北:陕西 甘肃 青海 宁夏 新疆
西南:重庆 四川 贵州 云南 西藏
华中:河南 湖北 湖南
关于我们 | 成功案例 | 知名客户 | 诚征代理 | 诚聘英才 | 广告服务 | 友情连接 | 帮助中心 | 网站地图 | 手机版 | 招标导航
客户咨询:400-633-1888 信息发布:13030031390 传真号码:010-59367999   京ICP证050708号-1   证书 京公网安备 11010802028602号  总部地址:北京市海淀区中关村大街11号7层(100190)
Copyright © 2005-2024 版权所有  招标网  北京智诚风信网络科技有限公司   北京中招国联科技有限公司   北京中招国联咨询有限公司   北京国建伟业咨询有限公司  哈尔滨中招国联科技有限公司  石家庄易投网络科技有限公司