上海飞机制造有限公司计算机辅助制造软件国际招标项目项目公告_招标网

上海飞机制造有限公司计算机辅助制造软件国际招标项目项目公告

信息发布日期：2021.05.06 标签：上海市招标计算机招标飞机招标软件招标

加入日期：	2021.05.06
截止日期：	2021.05.27
招标代理：	中化商务有限公司
地区：	上海市
内容：	飞机制造有限公司计算机辅助制造软件国际招标项目国际招标 ****受招标人委托对下列产品及服务进行国际公开竞争性招标，于--*在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。、招标条件项目概况：计算机辅助制造软件资金到位或资金来源落实情况：已
关键词：	计算机飞机软件

招标公告正文

上海飞机制造有限公司计算机辅助制造软件国际招标项目国际招标

中化商务有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2021-05-06在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。

1、招标条件

项目概况：计算机辅助制造软件

资金到位或资金来源落实情况：已到位

项目已具备招标条件的说明：已具备

2、招标内容：

招标项目编号：0747-2140SCCZQ204

招标项目名称：上海飞机制造有限公司计算机辅助制造软件国际招标项目

项目实施地点：中国上海市

招标产品列表(主要设备)：

序号产品名称数量简要技术规格备注1计算机辅助制造软件1套用于ARJ21支线飞机的三维数字化工装设计、工艺设计、公差标注、工艺性审查、工艺准备等，主要包括：机械加工基础、混合设计基础、加工工艺与标注、数控加工工艺、钣金加工工艺、模具设计基础、高级工装设计、管路工艺、复材工艺基础、复材加工与仿真模拟、复材加工设备接口/

3、投标人资格要求

投标人应具备的资格或业绩：1、投标人应为所投软件的软件开发商或者软件开发商授权的代理商；如果投标人在本次投标中提供的软件不是投标人自己制造（开发）的，须提供下列授权文件之一： a) 软件开发商出具的针对本项目的授权函； b) 软件开发商的子/母公司出具的针对本项目的授权函及软件开发商与子/母公司的关系证明材料； c) 软件开发商对授权的区域代理商（或总经销商等）出具的授权函及该区域代理商（或总经销商等）出具的针对本项目的授权函。如果境外投标人所投货物包含境内部分，则投标人须具备人民币结算能力，否则其投标将被否决。 2、1）关境内投标人须提供以下资质证书的复印件： ①加载统一社会信用代码的营业执照或事业单位法人证书； ②软件开发商在有效期内的最新版ISO9001质量管理体系认证证书或其他同等质量体系认证证书。 2）关境外投标人须提供以下资质证书的复印件： ①有效的企业登记证明材料； ②软件开发商在有效期内的最新版ISO9001质量管理体系认证证书或其他同等质量体系认证证书。 3、业绩要求：近3年（2018年1月1日至今），投标人应具有开发或销售本招标要求的同规格或类似软件不少于2套的业绩，同时提供相应的近3年（2018年1月1日至今）投标人签订的不少于2套的销售合同或销售订单复印件作为证明材料。销售合同或订单的复印件须能体现签订时间，销售产品内容、规格、数量及签订双方等关键信息，否则将被作为无效证明材料。 4、银行资信证明： 1）境内投标人应当提供在开标日前3个月内由其开立基本账户的银行开具的有效资信证明； 2）境外投标人应当提供在开标日前3个月内由其开户银行开具的有效资信证明。 5、如潜在投标人在以往投标活动中有以下行为，则招标人可以将其列入“上飞公司限制采购供应商名单”。若投标人在“上飞公司限制采购供应商名单”中，其投标将被否决： (1) 投标供应商在采购过程及中标/成交后合同签订、履约过程中存在下列行为的，经查实后，可其列入“上飞公司限制采购供应商名单”并在 3 年内限制该供应商参与上飞公司采购工作： a) 非中标/非成交供应商存在挂靠、串标、围标、非法以他人名义投标的行为（被挂靠公司一并纳入限制采购供应商名单）； b) 联系人或参加开标活动人员为非正式员工，并对上飞公司采购进度带来影响的； c) 在采购过程中有恶意诽谤、诬告或陷害其他竞争对手的不良行为； d) 中标/成交后无正当理由不按时签订合同或不按照投标/响应文件约定签订合同的； e) 非中标/非成交供应商提供虚假证件、资质证书、业绩证明等相关材料，没有实际履行能力但承诺商务和技术部分可达到采购要求以骗取中标/成交的虚假应标行为和以其他方式弄虚作假骗取中标/成交的行为； f) 标的产品交付后，多次验收测试不合格的； g) 向公司有关人员馈赠任何礼品，价值低于 200 元（不含），情节较轻的行为； h) 其他违反国家法律、法规或文件相关规定的，情节较轻的行为。 (2) 投标供应商在采购过程及中标/成交后合同签订、履约过程中存在下列行为的，经查实后，可其列入“上飞公司限制采购供应商名单”并在 5 年内限制该供应商参与上飞公司采购工作： a) 中标/成交供应商存在挂靠、串标、围标、非法以他人名义投标的行为（被挂靠公司一并纳入限制采购供应商名单）； b) 联系人***

***

未领购招标文件是否可以参加投标：不可以

4、招标文件的获取

招标文件领购开始时间：2021-05-06

招标文件领购结束时间：2021-05-20

是否在线售卖标书：否

获取招标文件方式：现场领购

招标文件领购地点：中化商务电子招投标平台（e.sinochemitc.com）

招标文件售价：￥2000/$300

其他说明：网络标书销售：凡有意参加投标者，请于2021年5月6日上午9:00（北京时间，下同）起至2021年5月20日下午16:00，登录中化商务电子招投标平台（e.sinochemitc.com）进行注册（免费），并通过网上支付方式购买招标文件。支付成功后，可下载招标文件及增值税电子普通发票。如遇网站平台操作问题，请拨打平台技术支持联系电话***

***

投标截止时间（开标时间）：2021-05-27 10:00

投标文件送达地点：上海市浦东新区海阳西路555号前滩中心27层中化商务有限公司上海分公司呈双厅会议室

开标地点：上海市浦东新区海阳西路555号前滩中心27层中化商务有限公司上海分公司呈双厅会议室

6、投标人在投标前应在必联网（https://www.ebnew.com）或机电产品招标投标电子交易平台（https://）完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。

7、联系方式

***

地址：***

联系人***

联系方式***

***

地址：***

联系人***

联系方式***

***

招标代理机构开户银行(人民币):

招标代理机构开户银行(美元):

账号(人民币):

账号(美元):

SAMC Computer-aided manufacturing software ICB

SINOCHEM COMMERCE CO.,LTD entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on on 2021-05-06.

1.Bidding Conditions

Overview：Computer-aided manufacturing software

Source of Funds：self-raised

Description of The Prepared Bidding Conditions：well-prepared

2.Bidding Content：

Bidding No：0747-2140SCCZQ204

Project Name：SAMC Computer-aided manufacturing software ICB

Place of Implementation：Shanghai, China

List of Products：

NO.Product NameQuantityMain Technical DataRemarks1Computer-aided manufacturing software1 SetIt is used for the 3-dimension digital tooling design, process design, tolerance marking, process review, process preparation, etc. of ARJ21 regional aircraft, mainly including: Machining basics, mixed design basics, processing technology and marking, CNC processing technology, sheet metal processing technology, mold design basics, advanced tooling design, pipeline technology, composite material technology basis, composite material processing and simulation simulation, composite material processing equipment interface.1

3.Qualification Requirements For Bidder

Qualifications or Performance：1.The Bidder shall be the software developer of the bid software or an authorized agent of the software developer. If the software provided by the Bidder in this bid is not created (developed) by the Bidder itself, one of the following authorization documents shall be provided: a) An authorization letter from the software developer for this project; b) An authorization letter from the software developer's subsidiary/parent company for this project, and testimonial materials of the relationship between the software developer and its subsidiary/parent company; c) Authorization letter issued by the software developer to the authorized regional agent (or master distributor, etc.), and the authorization letter issued by this regional distributor (or master distributor, etc.) for this project. If the bid of an overseas Bidder includes the goods within the territory, the Bidder must be capable of RMB settlement; otherwise, the bidding will be rejected.2. 1) Domestic Bidder shall provide copies of the following qualification certificates: ①Business License or Legal Person Certificate of the Institution with Unified Social Credit Code; ②Valid ISO9001 quality management certificate or other equivalent quality system certificate of manufacturer of the software developer. 2) The overseas Bidder shall provide copies of the following qualification certificates: ①Valid business registration certificates; ②Valid ISO9001 quality management certificate or other equivalent quality system certificate of manufacturer of the software developer. 3. Achievements requirement: In the past 3 years (from January 1, 2018 to now), the Bidder shall have a track record of developing or selling not less than 2 sets of software with the same specifications or similar features required by this bidding. The Bidder shall also provide as supporting documents a copy of the corresponding sales contracts or sales orders of at least 2 sets of the software, which are signed by the Bidder in the past 3 years (from January 1, 2018 to now) The copies of the Sales Contract or the Order shall be able to reflect the key information, such as the signing time, the sales content, specification and number, as well as the Two Parties, etc., otherwise it will be regarded as invalid proof. 4. Bank reference letter: 1) Domestic bidder shall provide the valid bank reference letter from the bank which the basic account was opened, issued within three months prior to the time of bid opening. 2) Foreign bidder shall provide the valid bank reference letter issued within three months prior to the time of bid opening. 5. If the potential bidder has the following behaviors in previous bidding activities, the Tenderee can include it in the List of Suppliers Restricted by Shanghai Aircraft Manufacturing Co., Ltd (SAMC). If the bidder is listed in the List of Suppliers Restricted by Shanghai Aircraft Manufacturing Co., Ltd (SAMC), its bid will be rejected: (1) If the bidding supplier has the following behaviors in the process of procurement, contract signing and performance after winning the bid/getting a deal, after verification, it shall be listed in the List of Suppliers Restricted by SAMC and limited to participate in the procurement work of SAMC within 3 years: a) Non winning/non successful suppliers have the behaviors of affiliation, collusion, together-conspired bidding and illegal bidding in the name of others (The affiliated companies are also included in the List of Restricted Suppliers); b) The contact person or the person participating in the bid opening activity is an informal employee and affects the SAMC’s procurement schedule; c) Malicious slander, false accusation or framing of other competitors in the procurement process. d) The contract is not signed on time or in accordance with the provisions of the bidding/response documents without proper reasons after winning the bid/getting a deal; e) Non-winning/non-successful suppliers provide false certificates, qualification certificates, performance certificates and other related materials, have no actual ability to fulfill the commercial and technical parts but promise that it can meet the procurement requirements, or in other ways to win the bid/get a deal by deception and fraud; f) The subject product fails to pass the acceptance test for many times after delivery; g) Giving any gift valued at less than 200 yuan to the relevant personnel of SAMC, with minor circumstances; h) Other behaviors in violation of State laws and regulations, and relevant provisions of the document, with minor circumstances; (2) If the bidding supplier has the following behaviors in the process of procurement, contract signing and performance after winning the bid/getting a deal, after verification, it shall be listed in the List of Suppliers Restricted by SAMC and limited to participate in the procurement work of SAMC within 5 years: a) The winner of the bid/successful suppliers have the behaviors of affiliation, collusion, together-conspired bidding and illegal bidding in the name of others (The affiliated companies are also included in the List of Restricted Suppliers); b) The contact person or the person participating in the bid opening activity is an unofficial employee and causes financial loss to SAMC; c) Illegal subcontracting, default subcontracting and changing the project manager without authorization after winning the bid/getting a deal; d) Failing to submit performance bond, letter of guarantee or relevant documents in accordance with the requirements of the contract during performance of the contract; e) Changing without authorization, terminating performance or failing to perform contract business as agreed in the process of performing the contract; f) Serious quality problems occurred or having behaviors that cause economic losses, safety accidents and adverse social impacts to SAMC in the process of fulfilling the bid commitment or contract; g) Serious violation of bid commitment or contract agreement, dishonest behavior of raising price, reducing quality, delaying construction period or delivery time; h) The winner of the bid/successful suppliers provide false certificates, qualification certificates, performance certificates and other related materials, have no actual ability to fulfill the commercial and technical parts but promise that it can meet the bidding requirements, or in other ways to win the bid/get a deal by deception and fraud; i) Giving gifts and banquets valued at more than 200 yuan but less than 1,000 yuan to relevant personnel of SAMC, with serious circumstances. j) Any act that damages the interests of SAMC; k) Other behaviors in violation of State laws and regulations, and relevant provisions of the document, with serious circumstances. (3) If the bidding supplier has the following behaviors in the process of procurement, contract signing and performance after winning the bid/getting a deal, after verification, it shall be listed in the List of Suppliers Restricted by SAMC and permanently restricted to participate in the procurement work of SAMC: a) Having commercial bribery conducts, for example，arranging banquets, tours, fitness and other recreational activities for all kinds of relevant staff or bidding agencies engaged in procurement work of SAMC, or giving gifts, monetary gifts and securities valued over 1,000 yuan, or giving for free, or selling (leasing) and lending vehicles, real estate and other bulk goods at obvious low price, and other behaviors that may affect the fair performance of duties of relevant staff of SAMC; b) Being listed in the list of abnormal operation, the list of dishonest persons to be executed or the list of serious illegal enterprises by the judicial department, administrative departments at all levels; c) Other behaviors in violation of State laws and regulations, and relevant provisions of the document, with serious circumstances.

Joint Bids：NOT Available

Bid without the bidding documents：NOT Available

4.Acquisition of Bidding Documents

Beginning of Selling Bidding Documents：2021-05-06

Ending of Selling Bidding Documents：2021-05-20

Sell bidding doc online or not：No

To Obtain：On-site Purchase

Place：e.sinochemitc.com

Price of Bidding Documents: ￥2000/$300

Additional Instructions：1) Bidding documents purchasing online: Interested bidders may log in to e.sinochemitc.com from Beijing time 2021-5-6 09:00 till 2021-5-20 16:00 to make registration (for free), and make online payment for bidding document. After successful payment, download Bidding Documents and Value-added Tax Electronic General Invoice. In case of technical problems, please contact the platform technical support: 010-86391277.

5.Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2021-05-27 10:00

Place of Bid：CHENGSHUANG Meeting room, Floor 27, New Bund Center, No.555 West Haiyang Road, Pudong New Area, Shanghai, P. R. China.

Place of Bid Opening：CHENGSHUANG Meeting room, Floor 27, New Bund Center, No.555 West Haiyang Road, Pudong New Area, Shanghai, P. R. China.

6.The bidder needs to register before the tender on . And the evaluation results will be released on
.

7.Contact Details

Purchasers：Shanghai Aircraft Manufacturing Co.,Ltd.

Add.：No. 919, Shangfei Rd. , Pudong district, Shanghai

Contact：Mrs. Song

Tel：021-6875 8006/8765

Bidding Agency：SINOCHEM COMMERCE CO.,LTD

Add.：Floor 27, New Bund Center, No.555 West Haiyang Road, Pudong New Area, Shanghai, P. R. China

Contact：YANG Zhange/ ZOU Yu

Tel ：021-6875 8006/8765/15317319385

8.Remittance Approach

Bank(RMB):

Bank(USD):

Account NO.(RMB):

Account NO.(USD):

地区导航: 华东: 上海　江苏　浙江　安徽　福建　江西　山东

华北: 北京　天津　河北　山西　内蒙古

东北: 辽宁　吉林　黑龙江

华南: 广东　广西　海南

西北: 陕西　甘肃　青海　宁夏　新疆

西南: 重庆　四川　贵州　云南　西藏

华中: 河南　湖北　湖南