上海飞机制造有限公司线路缺陷分析仪国际招标项目项目公告_招标网

上海飞机制造有限公司线路缺陷分析仪国际招标项目项目公告

信息发布日期：2020.06.16 标签：上海市招标飞机招标路招标

加入日期：	2020.06.16
截止日期：	2020.07.08
地区：	上海市
内容：	飞机制造有限公司线路缺陷分析仪国际招标项目国际招标中化商务有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于--*在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。、招标条件项目概况：线路缺陷分析仪资金到位或资金来源落实情况：已到位项目
关键词：	飞机路

招标公告正文

上海飞机制造有限公司线路缺陷分析仪国际招标项目国际招标

中化商务有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2020-06-16在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。

1、招标条件

项目概况：线路缺陷分析仪

资金到位或资金来源落实情况：已到位

项目已具备招标条件的说明：已具备

2、招标内容：

招标项目编号：0747-2040SCCZQ109

招标项目名称：上海飞机制造有限公司线路缺陷分析仪国际招标项目

项目实施地点：中国上海市

招标产品列表(主要设备)：

序号产品名称数量简要技术规格备注1线路缺陷分析仪1套线路缺陷分析仪可进行线缆故障模拟和线缆缺陷分析，分析线缆的短路、断路等常见故障。通过在实验室进行故障复现，模拟不同工艺装配方式造成的线缆故障状态，采用线路缺陷分析仪检测确定故障情况，并改进装配方法，优化装配工艺。

3、投标人资格要求

投标人应具备的资格或业绩：1、投标人必须是所投货物的制造商或制造商授权的代理商，若投标人为代理商则需提供制造商出具的授权书原件，否则其投标将被否决。如果投标人从中华人民共和国关境外提供货物的，一旦中标，投标人必须是与招标人签订本项目外贸合同的签约方。如投标人不具备与招标人签订外贸合同的能力，其投标将被否决。如果境外投标人所投货物包含境内部分，则投标人须具备人民币结算能力，否则其投标将被否决。 2、1）关境内投标人须提供以下资质证书的复印件： ①加载统一社会信用代码的营业执照或事业单位法人证书； ②投标货物制造商在有效期内的ISO9001质量管理体系认证证书或其他同等质量体系认证证书，且该证书的有效期截止日期自开标之日起不少于3个月。 2）关境外投标人须提供以下资质证书的复印件： ①有效的企业登记证明材料； ②投标货物制造商在有效期内的ISO9001质量管理体系认证证书或其他同等质量体系认证证书，且该证书的有效期截止日期自开标之日起不少于3个月。 3、业绩要求：近3年（2017年1月1日至今），投标货物制造商应具有制造和/或销售不少于5台的线路缺陷分析仪的业绩并提供业绩清单（清单中应列出销售时间、销售数量、设备名称、设备型号及最终用户等），并同时提供对应的投标货物制造商签订的近3年（2017年1月1日至今）不少于5台的线路缺陷分析仪的销售合同或销售订单复印件作为证明材料。销售合同或订单的复印件须能体现签订时间，销售产品内容、规格及数量，签章双方等关键信息，否则将被作为无效证明材料。 4、银行资信证明： 1）境内投标人应当提供在开标日前3个月内由其开立基本账户的银行开具的有效行资信证明； 2）境外投标人应当提供在开标日前3个月内由其开户银行开具的有效资信证明。 5、如潜在投标人在以往投标活动中有以下行为，被招标人列入“黑名单”的，其投标将被否决：第一条投标人在招投标过程及中标后合同签订、履约过程中存在下列行为的，经查实后，其将被列入“上飞公司供应商黑名单”并在3年内不得参与上飞公司招投标： (一) 在投标过程中非中标供应商存在挂靠、串标、围标、非法以他人名义投标的行为（被挂靠公司一并纳入黑名单）； (二) 联系人或参加开标活动人员为非正式员工，并对上飞公司招标进度带来影响的； (三) 不遵守招投标法律法规，在招标采购过程中有恶意诽谤、诬告或陷害其他竞争对手的不良行为； (四) 中标后无正当理由不按时签订合同或不按照招投标文件约定签订合同的； (五) 非中标供应商提供虚假证件、资质证书、业绩证明等相关材料，没有实际履行能力但承诺商务和技术部分可达到招标要求以骗取中标的虚假应标行为和以其他方式弄虚作假骗取中标的行为； (六) 标的产品交付后，多次验收测试不合格的； (七) 向公司有关人员馈赠任何礼品，价值未超过200元，情节较轻的行为； (八) 其他违反国家法律、法规或招标文件相关规定的，情节较轻的行为。第二条投标人在招投标过程及中标后合同签订、履约过程中存在下列行为的，经查实后，其将被列入“上飞公司供应商黑名单”并在5年内不得参与上飞公司招投标： (一) 在投标过程中中标供应商存在挂靠、串标、围标、非法以他人名义投标的行为（被挂靠公司一并纳入黑名单）； (二) 联系人***

***

未领购招标文件是否可以参加投标：不可以

4、招标文件的获取

招标文件领购开始时间：2020-06-16

招标文件领购结束时间：2020-06-24

是否在线售卖标书：否

获取招标文件方式：现场领购

招标文件领购地点：/

招标文件售价：￥2000/$300

其他说明：(1) 网络标书销售：凡有意参加投标者，请于2020年6月16日起至2020年6月24日，每天（节假日除外）北京时间9:00至11:30时，13:00至16:00时，登录中化商务电子招投标平台（e.sinochemitc.com）进行注册（免费），上传材料并通过网上支付方式购买招标文件。上传材料包括：投标人营业执照或事业单位法人证书或有效的企业登记证明材料及投标货物制造商有效期内的ISO9001质量管理体系认证或同等质量体系认证证明。支付成功后，可下载招标文件及增值税电子普通发票。如遇网站平台操作问题，请拨打平台技术支持联系电话***

***

投标截止时间（开标时间）：2020-07-08 10:00

投标文件送达地点：上海市浦东新区世纪大道1600号陆家嘴商务广场M层中化厅会议室

开标地点：上海市浦东新区世纪大道1600号陆家嘴商务广场M层中化厅会议室

6、投标人在投标前应在必联网（https://www.ebnew.com）或机电产品招标投标电子交易平台（http://）完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。

7、联系方式

***

地址：***

联系人***

联系方式***

***

地址：***

联系人***

联系方式***

***

招标代理机构开户银行(人民币):

招标代理机构开户银行(美元):

账号(人民币):

账号(美元):

SAMC In-Circuit Defect Analyzer ICB

SINOCHEM COMMERCE CO.,LTD entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on on 2020-06-16.

1.Bidding Conditions

Overview：In-Circuit Defect Analyzer

Source of Funds：self-raised

Description of The Prepared Bidding Conditions：well-prepared

2.Bidding Content：

Bidding No：0747-2040SCCZQ109

Project Name：SAMC In-Circuit Defect Analyzer ICB

Place of Implementation：Shanghai, China

List of Products：

NO.Product NameQuantityMain Technical DataRemarks1In-Circuit Defect Analyzer1 setThe IN CIRCUIT DEFECT ANALYZER can simulate the cable fault and analyze the common faults such as short circuit and open circuit. The fault state of the cable caused by different process assembly methods is simulated by fault recurrence in the laboratory. The fault condition is detected by the defect analyzer, and the assembly method is improved to optimize the assembly process.

3.Qualification Requirements For Bidder

Qualifications or Performance：1.The Bidder must be the manufacturer of the proposed goods or the agent authorized by the manufacturer. The Bidder shall provide the original of the authorization issued by the manufacturer if it is an agent, otherwise the bid will be rejected. The bidders must be the contract party and have the ability to fulfill foreign trade contract with SAMC if offering Goods from outside PRC customs territory, otherwise the bid will be rejected. If the foreign bidders have goods provided within PRC customs territory, the bidder shall have the ability to fulfill RMB contract directly with SAMC, otherwise the bid will be rejected. 2.1) Domestic Bidder shall provide copies of the following qualification certificates: ①Business License or Legal Person Certificate of the Institution with Unified Social Credit Code; ②Valid ISO9001 quality management certificate or other equivalent quality system certificate of manufacturer of the bidding product, and the expiration date of the certificate shall not be less than 3 months from the date of bid opening. 2) The overseas Bidder shall provide copies of the following qualification certificates: ①Valid business registration certificates; ②Valid ISO9001 quality management certificate or other equivalent quality system certificate of manufacturer of the bidding product, and the expiration date of the certificate shall not be less than 3 months from the date of bid opening. 3.Achievements requirement: In the past 3 years (from January 1, 2017 to now), the Manufacturer of the Bidding Product shall have a performance of manufacturing and/or selling not less than 5 sets of IN-CIRCUIT DEFECT ANALYZER and provide a list of performance (Sales time, sales quantity, equipment name, equipment model and the Buyer, etc. shall be listed), and provide copies of sales contracts or sales orders of not less than 5 sets of IN-CIRCUIT DEFECT ANALYZER signed by the corresponding the Bidding goods manufacturers in the recent 3 years (from January 1, 2017 to now) as proof materials. The copies of the Sales Contract or the Order shall be able to reflect the key information, such as the signing time, the sales content, specification and number, as well as the Two Parties, etc., otherwise it will be regarded as invalid proof. 4.Bank reference letter: 1) Domestic bidder shall provide the valid bank reference letter from the bank which the basic account was opened, issued within three months prior to the time of bid opening. 2) Foreign bidder shall provide the valid bank reference letter issued within three months prior to the time of bid opening. 5.The qualification of the bidder will be vetoed if the potential bidders involve the following activities and being included in “black list”： Article 1 If the bidder are verified to be involved in the following actions during and after the bidding processes, it will be listed in the “blacklist of suppliers for SAMC” , and are not permit to participate the bidding projects of SAMC in 3 years. (1) Where suppliers who have not won the bidding have behaviors of affiliation, collusion, bid-rigging, illegal bid on behalf of others (together included in the blacklist by the affiliated company); (2) Where contact or personnel who participate in the bid opening activities are informal employees and have impact on the tendering progress of Shanghai Aircraft Manufacturing Co., Ltd.; (3) Do not follow laws and regulations of tendering and bidding and have bad behaviors of malicious slander and false accusation or charge against other competitors in the process of tendering for purchasing; (4) Do not sign contract on schedule without justified reasons or as agreed in the Bidding Documents after winning the bidding; (5) Where suppliers who have not won the bidding provide false certificates, qualification certificates, proof of performance and other relevant materials and have no actual performance ability, but promise that commercial and technical part can reach the tendering requirements to win the bidding by cheating or other fraudulent means. (6) Where multiple acceptance tests are failed after the delivery of the subject product; (7) Slight behavior of providing any gift to concerned personnel of the company, with the cost not more than RMB 200; (8) Other light behaviors of violating state laws, regulations or the relevant provisions of the Bidding Documents. Article 2 Where the bidder has following behaviors in the bidding and tendering process and in the process of signing contract and performance after winning the bidding, it will be included in the “supplier blacklist of Shanghai Aircraft Manufacturing Co., Ltd." and shall not participate in the bidding and tendering of Shanghai Aircraft Manufacturing Co., Ltd. within 5 years after being verified: (1) Where suppliers who have won the bidding have behaviors of affiliation, collusion, bid-rigging, illegal bid on behalf of others (together included in the blacklist by the affiliated company); (2) Where contact or personnel who participate in the bid opening activities are informal employees and bring economic losses to Shanghai Aircraft Manufacturing Co., Ltd.; (3) Illegally subcontract, sublet by breach of contract and replace the Project Manager without authorization after winning the bidding; (4) Do not submit performance security, letter of guarantee or relevant certificate according to contract requirements in the process of performing the contract; (5) Change and terminate the performance without authorization or do not perform the contract business in the process of performing the contract; (6) Serious quality problems or behaviors of causing economic losses, safety accidents and adverse social impact to the Tenderer in the performance of the tender commitments or contract; (7) Dishonest behaviors of seriously violating the tender commitments or contract agreement, raising prices, reducing quality and delaying the duration or delivery time; (8) Where suppliers who have won the bidding provide false certificates, qualification certificates, proof of performance and other relevant materials and have no actual performance ability, but promise that commercial and technical part can reach the bidding requirements to win the bidding by cheating or other fraudulent means. (9) Slight behavior of providing gifts and entertainment to concerned personnel of the company, with the cost more than RMB 200 and less than RMB 1000; (10) Behavior of damaging the interests of Shanghai Aircraft Manufacturing Co., Ltd.; (11) Other relatively severe behaviors of violating state laws, regulations or the relevant provisions of the Bidding Documents. Article 3 Where the bidder has following behaviors in the bidding and tendering process and in the process of signing contract and performance after winning the bidding, it will be included in the “supplier blacklist of Shanghai Aircraft Manufacturing Co., Ltd." and are permanently restricted to participate in the bidding and tendering of Shanghai Aircraft Manufacturing Co., Ltd after being verified: (1) Commercial bribery behaviors, such as arranging banquets, travel, fitness and other entertainment activities and giving presents, cash gift and securities with value more than RMB 1000 for various staff engaged in the tendering work or the tendering agency, and selling (leasing) and lending vehicle, house and other bulk goods free or at a obviously low price and other behaviors that may affect the impartial duty performance of relevant staff of Shanghai Aircraft Manufacturing Co., Ltd; (2) Where the bidders are included in the by the judicial department, the administrative departments at all levels included in the abnormal operation directory, list of person subject to enforcement for dishonesty or list of serious illegal enterprises by the judicial authority and administrative departments at all levels; (3) Other serious behaviors of violating state laws, regulations or the relevant provisions of the Bidding Documents.

Joint Bids：NOT Available

Bid without the bidding documents：NOT Available

4.Acquisition of Bidding Documents

Beginning of Selling Bidding Documents：2020-06-16

Ending of Selling Bidding Documents：2020-06-24

Sell bidding doc online or not：No

To Obtain：On-site Purchase

Place：/

Price of Bidding Documents: ￥2000/$300

Additional Instructions：1) Bidding documents purchasing online: Interested bidders may log in to e.sinochemitc.com from 2020-6-16 till 2020-6-24 during the period 09:00~11:30 AM, 13:00~16:00 PM (Beijing time) to make registration (for free), upload documents and make online payment for bidding document. Uploading documents include business licenses, Certificate of Legal Person of Public Institutions of the bidder, and certificates of ISO9001 quality management system or equivalent quality system certificates of manufacturer of the bidding product. After successful payment, download Bidding Documents and Value-added Tax Electronic General Invoice. In case of technical problems, please contact the platform technical support: 010-86391277.

5.Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2020-07-08 10:00

Place of Bid：ZHONGHUA Meeting room, Floor M, Lujiazui Business Plaza, No.1600 Century Avenue, Shanghai 200122, P. R. China.

Place of Bid Opening：ZHONGHUA Meeting room, Floor M, Lujiazui Business Plaza, No.1600 Century Avenue, Shanghai 200122, P. R. China.

6.The bidder needs to register before the tender on . And the evaluation results will be released on
.

7.Contact Details

Purchasers：Shanghai Aircraft Manufacturing Co.,Ltd.

Add.：No. 919, Shangfei Rd. , Pudong district, Shanghai

Contact：Miss Liu

Tel：021 6875 8006/8001/8765

Bidding Agency：SINOCHEM COMMERCE CO.,LTD

Add.：Floor M, Lujiazui Business Plaza, No.1600 Century Avenue, Shanghai

Contact：YANG Zhange/ ZHANG Xiao/ ZOU Yu

Tel ：021 6875 8006/8001/8765

8.Remittance Approach

Bank(RMB):

Bank(USD):

Account NO.(RMB):

Account NO.(USD):

地区导航: 华东: 上海　江苏　浙江　安徽　福建　江西　山东

华北: 北京　天津　河北　山西　内蒙古

东北: 辽宁　吉林　黑龙江

华南: 广东　广西　海南

西北: 陕西　甘肃　青海　宁夏　新疆

西南: 重庆　四川　贵州　云南　西藏

华中: 河南　湖北　湖南